Paging; Call Forward Override ([Dss] Override); Night Transfer - Toshiba DK User Manual

Paging

You can make an announcement page to a group of station telephone speakers selected
in system programming with
programmed) on either the DSS console or the DADM can be used for page
announcements. See

Call Forward Override ([DSS] Override)

Either the DSS buttons on your DSS console or the associated telephone can be set in
system programming to ring stations that are in the Call Forward mode, instead of
being forwarded. Usually the console's telephone is the unit activated to perform this
function. Among other applications, this feature can be used to notify a person who
forgets to deactivate the Call Forward feature after returning to the office.
Important!
➤
To override call forward with the console's associated telephone
1. Press
[PDN].
2. Dial the station
number set for call
forward.
➤
To override call forward with your DSS Console
➤
Press the station [DSS] set for call forward.

Night Transfer

You can use the DSS console to make the system ring different telephones for
incoming calls during different times of the day. For further details, refer to the Strata
DK System Administrator's User Guide.
➤
To enable/disable night transfer
➤
Press
Strata DK Digital Telephone 10/01
"All Call Page" on Page 66.
DSS buttons on DADMs cannot override Call Forward.
or
Make the call as you would from any other station.
This procedure assumes your station has a typical
program setting.
to toggle night transfer ON/OFF.
Add-on Module/DSS Console
on the DSS console.
Features
(if
131