Tone/Pulse Dialing; Two (Tandem) Co Line Connection; [Dn] Button - Toshiba CT User Manual

Tone/Pulse Dialing

With some older Central Offices, you may have to make calls on CO lines that are
programmed for rotary dial pulses. This feature enables you, while on these lines, to switch to
tone dial in order to access remote equipment (such as an answering machine) requiring
DTMF tones.
With ISDN calls, when
will be sent with DTMF tones.
To change Tone Dialing
1. Access a CO line.
2. Dial a telephone
number.
3. While on the call,
press

Two (Tandem) CO Line Connection

[DN] Button

This feature enables a station user to connect two CO lines, then drop out of the conversation.
To connect two outside lines (using a [DN] button)
1. While talking on an
outside call using a
[DN] button, press
2. Dial a CO line access
code and then the
outside telephone
number.
Strata DK Digital Telephone 5/99
Although the CO line is programmed for rotary dial pulses,
access the CO line and dial the telephone number like any other
call described in this user guide.
The Tone LED lights steady red and you are able to send
DTMF tones with your dial pad. The feature is cancelled when
. the call is completed.
You hear dial tone. The [DN] LED flashes (conference rate).
.
is pressed, all of the digits entered after that point
Features
Tone/Pulse Dialing
69