Cleaning The Gas Valve Vent Tube; Cleaning And Adjusting The Combustion Air Blower - Frymaster Pasta Magic Installation And Operation Manual

Gas water cooker

Hide thumbs Also See for Pasta Magic:

Table of Contents

Annual Preventative Maintenance

The following procedures should be performed annually.

4.2

Cleaning the Gas Valve Vent Tube

1. Set the power switch and the gas valve to the OFF position.

2. Carefully unscrew the vent tube from the gas valve. NOTE: The vent tube may be straightened

for ease in removal.

3. Pass a piece of wire through the tube to remove any obstruction.

4. Remove the wire and blow through the tube to ensure it is clear.

5. Reinstall the tube and bend it so that the opening is pointing downward.

4.3

1. Unplug the cooker. Mark and disconnect the four wires running from the motor at the inline

connectors.

2. Remove the four nuts and bolts securing the blower to mounting bracket. Remove the blower

from the cooker.

3. Remove the three fasteners that secure the blower motor assembly to the blower housing, and

separate the two components.

Remove these fasteners.

(On black-colored FASCO

blowers there are three

nuts. On silver-colored

KOOLTRONICS blowers

there are three screws.)

4-2

Table of Contents