Table of Contents
Advertisement
Storage
Storing the Machine
Whenever you store the machine over 30 days,
prepare it as follows:
1.
Clean the machine; refer to
Machine (page
35).
2.
Start the engine. Allow the engine to idle for 3
minutes and then stop the engine.
3.
Drain the engine oil while the engine is still
warm, and fill the engine with new oil; refer to
Changing the Engine Oil (page
4.
Push the decompression lever down and hold it
while slowly pulling the recoil starter 2 or 3 times.
Note:
Do not start the engine.
5.
Drain the fuel tank by unscrewing fuel drain plug
and collecting fuel in a fuel container.
Note:
Dispose of the fuel properly; recycle it
according to local codes.
6.
Check and tighten all bolts, nuts, and screws.
Repair or replace any part that is damaged.
7.
Paint all scratched or bare metal surfaces with
paint available from your Authorized Service
Dealer.
8.
Store the machine in a clean, dry garage or
storage area.
9.
Cover the machine to protect it and keep it clean.
Cleaning the
30).
36
Advertisement
Table of Contents
