Toro CM-1258Y-SD Operator's Manual page 12

Engine Controls
1. Fuel drain plug
2. Air cleaner
3. Recoil-start handle
4. Oilcap / dipstick
5. Engine-speed-control
knob
6. Fuel-injection pump
7. Fuel-shutoff lever
Figure 6
8. Fuel tank
9. Fuel cap
10. Decompression lever
11. Oil filter
12. Oil-drain plug
13. Oilcap / dipstick
Engine Speed Control Handle
The engine-speed-control handle
the operator to start and shut off the engine. It is
located on the engine cowl, and is connected to the
engine-speed-control knob, which is located on the
engine (Figure
handle:
1. Rotate the engine-speed-control handle
counterclockwise to unlock it.
2. Pull it all the way out and lock it by rotating it
clockwise.
3. Rotate it counterclockwise and push it in to stop
the engine.
Note:
The speed-control knob on the engine must be
loose (rotated counterclockwise) for the cowl-mounted
speed-control handle to work.
g020004
12
(Figure
8). To control the engine-speed-control
7) allows