Advertisement
2. Alternative
Use: Fixed rail sealing (order no. 17404)
Fig. 2
Remove the locking plate by loosening the screw (4.2). Place the
glider (1.0) on the „Söll-MultiRail" guide rail (2.0).
After placing the locking plate (4.1), re-tighten it with the screw (4.2)
to prevent the glider from sliding inadvertently.
The glider (1.0) can now be freely moved on the guide rail (2.0) using
the safety rope (3.0).
Unscrew the locking plate (4.1) and pull out the glider from the rail
when removing. Finally, screw on the plate again.
www.honeywellsafety.com
8
Advertisement
