Advertisement
C 1. Mounting/removing the glider
1. Alternative
Use: Opening / closing the glider
Fig. 1
To open the glider, retract the knurled bushing (1.2) and turn the
knurled nut (1.4) in the direction indicated by the arrow (A). After
approximately one rotation, do not retract the knurled bushing (1.2)
any further. Instead, maintain it in the same position. Turn the knurled
nut (1.4) up to the end stop.
Place the opened glider (1.0) on the guide rail (2.0).
After placing the knurled nut (1.4) in the direction indicated by the
arrow (B), tighten it up to the end stop using the locking device. The
glider (1.0) can be now freely moved on the guide rail (2.0) using a
lanyard.
It can be removed in the same way.
www.honeywellsafety.com
7
Advertisement
