Advertisement
B
Checking before use
B 1. Ensure that the glider, safety harness, lanyard with a DIN EN 355
compliant fall arrestor, a fall arrestor or a travelling safety device as
well as guide rails (= anchorage device) are in the flawless working
condition and are functioning properly before and during their every
use. Ensure that the device and the components are not deformed or
damaged.
B 2. The Söll „Söll-MultiRail" system may not be used if there are any
doubts regarding its safe use, if defects are visible, or if the device has
been strained as a result of a fall. It may not be used until written
permit is given by a competent person. If necessary, the "Söll-
MultiRail glider" should be returned to the manufacturer.
Attention!
A competent person is not authorised to carry out repairs!
B 3. Before each use, it has to be ensured that there is sufficient fall
clearance beneath the operator, so that in case of a fall, he cannot
strike the ground or against other obstacles.
www.honeywellsafety.com
5
Advertisement
