Download Print this page

D Maintenance - Honeywell MILLER Soll-MultiRail 17792 Instructions For Use And Maintenance Manual

Anchorage device horizontal openable glider

Advertisement

D
Maintenance
D 1. The regular maintenance of the "Söll-MultiRail glider" are to be
performed considering the legal regulations, the conditions of use and
environmental conditions. Maintenance must be performed by a
compentent person, at least once a year.
A competent person for the maintenance of this equipment is
a person suitably trained or qualified by knowledge and practical
experience to enable the maintenance to be performed properly.
D 2. Regular maintenance is essential as the safety of the operator
depends from the effectiveness and durability of the equipment.
D 3. Maintenance checklist (see fig.5)
The checklist has to be completed and signed by a competent person
by means of an indelible pen.The single check points have to be
marked respectively with "OK" or "D" (defect) .The competent person
is responsible for the accuracy of the information provided therein.
Check points marked with a "D" can be corrected by a competent
person only when the defect to be corrected concerns the removal of
dirt (paint, mortar, concrete) or when markings need to be cleaned.
This procedure must be noted in the annex of the check list (remarks),
complete with date and signature of the competent person. The due
date of the next regular inspection must also be indicated.
In case the correction of defects requires a partial disassembling of the
components, the "Söll-MultiRail glider" must be returned to the
manufacturer together with the manual and with a relevant comments
concerning the defect.
www.honeywellsafety.com
11

Advertisement

loading