Connect An Rj-45 Lan Cable; Connect The Ethernet Cable - Cognex In-Sight Micro Series Installation Manual

Connect an RJ-45 LAN Cable

To connect the vision system to an Ethernet network, plug a LAN cable (RJ-45 connector) into the I/O module's LAN port
and connect the other end of the cable to a switch/router or PC, as applicable.

Connect the Ethernet Cable

CAUTION:
All cable connectors are keyed to fit the connectors on the vision system. Do not force the connections or
l
damage may occur.
The I/O module's PoE port provides power and Ethernet connectivity to the In-Sight Micro vision system. If
l
you connect third-party devices to the I/O module's PoE port, you could damage the I/O module.
1. Connect the Ethernet cable's M12 connector to the vision system PoE connector.
16
Installation