Connect The Inputs And Outputs (Optional); Option 1: Connect The Breakout Cable - Cognex In-Sight Micro Series Installation Manual

Connect the Inputs and Outputs (Optional)

The vision system's I/O connector supplies connections for the acquisition trigger and high-speed outputs.
CAUTION: All cable connectors are keyed to fit the connectors on the vision system. Do not force the connections
or damage may occur.
Note:
I/O wiring or adjustments to I/O devices should be performed when the vision system is not receiving power.
l
The vision system must be Online for the discrete inputs and outputs to function.
l
Refer to the In-Sight
l

Option 1: Connect the Breakout Cable

Note: You can clip unused wires short or use a tie made of non-conductive material to tie them back.
1. Connect the Breakout cable's M8 connector to the vision system's I/O connector.
2. Connect the trigger and high-speed I/O wires to an appropriate device (for example, a PLC, trigger sensor or
strobe light). For more information, refer to
®
Explorer Help file for details on configuring the discrete input and output lines.
Breakout Cable Specifications on page 25.
12
Installation