Installation; Connectors And Indicators - Cognex In-Sight Micro Series Installation Manual

Installation

Read this section to learn how the vision system connects to its standard components and accessories. For a list of
options and accessories, contact your Cognex sales representative.
Note:
Cables are sold separately.
l
If a standard component is missing or damaged, immediately contact your Cognex Authorized Service
l
Provider (ASP) or Cognex Technical Support.

Connectors and Indicators

Connector/Indicator
I/O Connector
PoE Connector
LED1
LED2
ENET
Provides connections to the acquisition trigger input and high-speed outputs.
Provides the Ethernet connection for network communications and supplies power
to the vision system.
Green when active. User-configurable using Discrete Output Line 4 (Line 10 when
using the CIO-MICRO or CIO-MICRO-CC I/O module).
Red when active. User-configurable using Discrete Output Line 5 (Line 11 when
using the CIO-MICRO or CIO-MICRO-CC I/O module).
100-BaseT: Red when the vision system is receiving power during startup,
momentarily switches to green when a network connection is established, and
then blinks green when network traffic is detected. If a network connection cannot
be established, the LED remains red.
10-BaseT: Red when the vision system is receiving power during startup,
momentarily switches to green when a network connection is established. The
LED is solid green with red blinking when network traffic is detected. If a network
connection cannot be established, the LED remains red.
10
Function
Installation