Table of Contents
Advertisement
The scale will then divide the total weight by the number of samples and
display the average unit weight.
Zero the scale by pressing the
used, place the container on the scale and tare as discussed earlier.
Place a known quantity of items on the scale. After the weight display is stable
enter the quantity of items using the numeric keys followed by
number of units will be displayed on the "Quantity" display and the computed
average weight will be shown on the "Piece Weight" display.
As more items are added to the scale, the weight and the quantity will
increase.
If the scale is not stable, the calculation will not be completed. If the weight is
below zero, the quantity display will show negative count.
When LIGHT (unit weight window) indicator flash, this means current unit
weighing it too low for this specification scale, please try to use other
specification scale, otherwise, you will can't get accurate count data.
*if you input a incorrect data, press
5.3.2 Entering a known unit weight
If the unit weight is already known then it is possible to enter that value using
the keypad.
Enter the value of the unit weight using the numeric keys followed by pressing
the
key. The "Piece Weight " display will show the value as it was
entered.
The sample is then added to the scale and the weight will be displayed as well
as the quantity based upon the unit weight.
When LIGHT (unit weight window) indicator flash, this means current unit
weighing it too low for this specification scale, please try to use other
specification scale, otherwise, you will can't get accurate count data.
*if you input a incorrect data, press
5.3.3 resample
After completing the memorizing, you add the sample more and have new unit
weight value. This is resample function.
Add some samples, press
displays light with beep, the memory is updated. Add the samples more and
more repeating the above operation, then more precise average unit weight
VC series bench scales Technical Manual
key if necessary. If a container is to be
key. Weight, Unit weight and quantity
key to clear.
key to clear.
key. The
- 7 -
Advertisement
Table of Contents
