Table of Contents
Advertisement
Quick Links
user manual
WTC/S AnD WTC/SW RETAIL SCALES
TABLE OF COnTEnTS
We've been tried to provide complete and accurate information in this manual, however, we
make no representations and warranties with respect to the contents of this manual, and reserve
the right to make change to our products and manual without notice.
Scandinavia's largest webshop for scales
Disclaimer
Box 79, Industrivagen 3
Tel. +46 (0)176-208920
760 40 Vaddo, Sweden
Fax +46 (0)176-208929
2
2
2
3
3
3
4
4
4
5
5
6
6
6
6
6
7
8
8
Web
www.vetek.com
Email info@vetek.com
REVISED
1
07.2010
Advertisement
Table of Contents
Related Manuals for Vetek WTC/S
Summary of Contents for Vetek WTC/S
-
Page 1: Table Of Contents
WTC/S AnD WTC/SW RETAIL SCALES TABLE OF COnTEnTS 1. FUnCTIOnS 2. STRUCTURE 3. OPERATIOn KEYS AnD FUnCTIOnS 4. POWER 5. OPERATIOn 5.1. Turning on and off 5.2. Zero setting 5.3. Tare setting 5.4. Unit price inputting and clearing 5.5. -
Page 2: Functions
Before using the scale remove the protection foil from the weight pan. 3.2. [ZERO/BL] a. Zeroing the scale within permitted range b. Used in calibration - 4 - c. Used when storing the unit price d. Switch on or switch off backlight www.vetek.com info@vetek.com... -
Page 3: Power
The scale can also be operated when the battery is being charged. When the scale is on, turn switch off, all the display will disappear. D. After finishing the daily work, please turn power off. For the sake of safety, please disconnect the adaptor form, AC power. www.vetek.com info@vetek.com... -
Page 4: Zero Setting
5.4.2. Two ways to clear or change unit price • Directly clear the unit price by [C] key. • After the previous unit price has been input for 5 seconds, press the digit keys to replace the previous unit price value. www.vetek.com info@vetek.com... -
Page 5: Unit Price Storing
5.6.3. Press [M1]...[M9], the unit price corresponding to cargo number 1 to 7 will be displayed in unit price window and the scale will then return to normal weighing state. www.vetek.com info@vetek.com... -
Page 6: Checking The Stored Unit Price
When the backlight is on, and hold [ZERO] key for 3 seconds and then loose it, the total price window will display* b 1 o f f * . At this time the backlight is off and about three seconds later the scale will back to normal weighing state. www.vetek.com info@vetek.com... -
Page 7: Rs232Interface
Indications from displays are sent in a format of 6 digits, justified to the Indications from displays are sent in a format of 6 digits, justified to the right, with leading zeros. right, with leading zeros. RS232 connector RS232 connector www.vetek.com info@vetek.com... -
Page 8: Technical Parameters
The calibration and simple rectifying methods are not open to users. For details, please contact our sales agent in your country. Forbid to change the setting data of trading scale without the permission of the law ! www.vetek.com info@vetek.com...