Full Menu Settings - Default Setting - Toshiba TLP780E Owner's Manual

FULL MENU settings - Default setting

You can set the Input source, projection mode, etc. from FULL MENU [Default setting].
To operate FULL MENU, refer to page
Input source setting COMPUTER IN 1
Analog RGB(1)
: On/Off with ENTER
Y/P /P
: On/Off with ( ) or ( ) B R
COMPUTER IN 2
Analog RGB(2)
Digital RGB
VIDEO
S-VIDEO
CAMERA
Projection mode Standard
Rear
Ceiling
Rear ceiling
Background
Logo
Blue
None
No signal power off Off
5 min.
Power on Manual
Auto
Start-up screen On
Off
Reset EXEC. Return the settings of FULL MENU [Default setting] to the factory default values.
Notes
• It is impossible to exit from the menu if no input source is selected.
• If the check in the check box for the currently selected source is removed, the setting becomes effective the next time the input is changed.
• In the following conditions, the function to detect no signal ("No signal background", "No signal power off") does not activate:
46
1) When "Video mode" is set to the modes other than [Auto] and Video input or S-Video input is selected.
2) When "Signal format" 46 is set to the modes other than [Auto] and Y/P
• Note that the projector automatically powers up at the restoration of power after a failure, if "Power on" is set to [Auto] with the power plug inserted.
• Even if "Power on" is set to [Auto], the setting of [5 min.] of "No signal power off" is effective.
• Each item can be set at all input sources, but the settings made at one input source are applied in common to all input sources.
• The settings made are memorized automatically when the power is turned off by pressing the ON/STANDBY button. If the power cord is un-plugged or if
a power failure occurs while the projector is on, the settings are not memorized.
.
44
SET : COMPUTER IN 1 connector is selectable with the INPUT button.
SET : Use COMPUTER IN 1 connector as Analog RGB (1) input.
SET : Use COMPUTER IN 1 connector as Y/P
SET : COMPUTER IN 2 connector is selectable with the INPUT button.
SET : Use COMPUTER IN 2 connector as Analog RGB (2) input.
SET : Use COMPUTER IN 2 connector as Digital RGB input.
SET : Video input is selectable with the INPUT button.
SET : S-Video input is selectable with the INPUT button.
SET : Camera input is selectable with the INPUT button.
SET The projector is set to the floor-mounted front projection mode.
SET The projector is set to the floor-mounted rear projection mode.
SET The projector is set to the ceiling-mounted front projection mode.
SET The projector is set to the ceiling-mounted rear projection mode.
SET The TOSHIBA logo is displayed when no signal is input.
SET The entire screen is set to blue when no signal is input.
SET Nothing is displayed when no signal is input.
SET The power does not turn off automatically even if no signal status continues.
SET The power turns off automatically when no signal status continues for approx. 5 min.
SET The power turns on by pressing the ON/STANDBY button.
SET When the power plug is inserted, the power is on.
SET The start-up display appears when the power is turned on.
SET The start-up display does not appear when the power is turned on.
The relationship between input source and item
Analog RGB(1) Analog RGB(2)
/P input.
B R
Yes (common for all of the inputs)
Yes (common for all of the inputs)
Yes (common for all of the inputs)
Yes (common for all of the inputs)
Yes (common for all of the inputs)
Yes (common for all of the inputs)
Yes (common for all of the inputs)
/P input is selected.
B R
CONTENTS
Yes: Adjustable -: Not displayed
Digital RGB Y/P /P Video S-Video Camera
B R
51