Overlaying Projection - Toshiba TLP780E Owner's Manual

Overlaying projection

You can draw figures or write with a pen on
the picture of RGB input or video input, by
using the overlay function.
Remote control
2
INPUT ON/STANDBY
LASER
AUTO
KEYSTONE SET
L-CLICK R-CLICK
VOLUME/ADJUST
Camera control panel
MENU ENTER EXIT
PIP FREEZE
W.BALANCE
LOCK
RESIZE
CALL MUTE
Control panel
(Main unit side)
ON / STANDBY
VOL / ADJ
2
Preparation
Project a picture on the screen as explained in the step "Picture projection with the document
1
imaging camera".
Prepare white paper and a red or blue pen.
2
1
2
OVERLAY ARM LIGHT
3
3
CAMERA CAMERA
GAIN
4
5
Notes
• Handwriting in colors other than blue or red cannot be displayed properly.
• Handwriting in fine lines may not be displayed properly.
56
Set the white paper on a flat surface
and set the camera so that the paper
is projected onto the screen.
Adjust the camera to make the white paper be
projected on the wholescreen.
INPUT
Select the input source using the overlay
function by pressing INPUT.
INPUT
Select an input source other than the camera input.
OVERLAY Press OVERLAY.
Draw any line on the paper with a red or
RGB picture Screen
blue pen.
A drawn line is projected on the screen, overlapped
with the picture of the input source.
Paper
The position of a pen point can be confirmed on the
screen before drawing anything.
CAMERA Adjust the gain with CAMERA GAIN (+/-) so
GAIN
that the overlaying picture is displayed clearly.
59
CONTENTS