Table of Contents
Advertisement
FULL MENU adjustments and settings - Audio
You can set the sound emitted from the speaker from FULL MENU [Audio].
To operate FULL MENU, refer to page
Volume
ADJ.
Adjust the sound volume emitted from the speaker.
Speaker output
On
Off
Channel select
L+R
L
R
Loudness
On
Off
Reset
EXEC.
Return the adjustments and settings of FULL MENU [Audio] to the factory default values.
Notes
• When the camera input is selected, sound is not emitted.
• Each item can be set at every input source except the camera input, but the settings made at one input source are applied to all input sources as shown
in the table. The sound volume can be adjusted for each input source except the camera input.
• The adjustments or settings made are memorized automatically when the power is turned off by pressing the ON/STANDBY button. If the power cord is
unplugged or if a power failure occurs while the projector is on, the adjustments or settings are not memorized.
.
44
SET
The sound is emitted from the speaker.
SET
No sound is emitted from the speaker.
SET
The sound of the left and right channels is mixed and emitted from the speaker.
SET
Only the sound of the left input channel is emitted from the speaker.
SET
Only the sound of the right channel is emitted from the speaker.
SET
The loudness effect is added to the speaker sound.
SET
The loudness effect is not added to the speaker sound.
The relationship between input source and item
Analog RGB(1) Analog RGB(2)
Digital RGB Y/P
/P
B
R
Yes
Yes
Yes
Yes
Yes (common)
Yes (common)
Yes (common)
Yes (common)
49
CONTENTS
Yes: Adjustable -: Not displayed
Video
S-Video Camera
Yes
Yes
-
Yes (common)
-
Yes (common)
-
Yes (common)
-
Yes (common)
-
Advertisement
Table of Contents
