Table of Contents
Advertisement
Using the menus (Continued)
<Logo registration>
How to register user logo
1
Project a picture to register.
2
Select [User logo] in the Display setting menu, and press the
button.
3
Select <Logo registration> from the displayed menu list and press
the
button.
4
The registration area is displayed for confirmation. Select [OK]
and press the
button.
•
If the picture does not fall within the display area, use the computer to scroll
the screen.
5
Registration starts.
To stop the registration, press the RETURN button.
•
Notes
•
You can register a logo when the input is set to Computer.
•
If you register a logo after keystone distortion or digital zoom has been adjusted,
those adjustments will be reset to their factory settings. However, once the logo
registration is complete, they will return to the adjustments that you made.
•
The area that can be registered is 51 × 84 dots at the center of the screen. To
register a company logo, arrange the image within that space.
•
Only one logo can be registered. When a new image is registered, the old one is
deleted.
•
The time needed to register or display the image varies depending on the data size.
•
Using this function on commercial video software, broadcast or cable-broadcasting
except for the purpose of your private viewing and listening may infringe the
copyright protected by the copyright laws.
<Display style>
Select the size of the registered logo.
: Displays the registered image in the original size at center of the screen.
: Displays the registered image by enlarging it fully within the screen.
(As processed digitally, the image quality is degraded.)
<Logo confirmation>
You can preview the registered logo.
<Reset logo>
You can reset the registered logo and display style to the factory setting. (The logo
set for the start-up screen and background is reset.)
40
The Default setting menu
This menu shows placement status and other settings.
Default setting 1 menu
or
Item
Keystone
Screen shrinking at bottom
Auto keystone Always corrects keystone distortion automatically.
Blackboard
When projecting on a non-screen surface, select a color in accordance with
mode
the projecting surface.
Press
No signal
Sets the time to wait for the power to be turned off after the last operation is
power off
made with no input signal.
Auto input
Sets whether the input with signals is only selected or not.
search
Beep
Beeps when operation is made.
Power on
Sets whether to turn on the power when the ON/STANDBY button is pressed
(Manual), or when the main power switch is turned on (Auto).
Detailed description
[Blackboard mode]
Projects the image in colors more like projecting on a screen.
Precaution
•
The projected image may differ depending on the type, color, and material of the
blackboard and wall even if the selected color is the same as the projected screen.
[Auto input search]
[On]: Automatically searches the signals that can
be projected, and switches input from the
connected device that outputs the video
signals each time the INPUT button is pressed.
Input from a connected device that outputs no
video signals is skipped.
[Off]: Displays the Input select menu.
Toggle with
(The input without signals can be selected.)
[Power on]
If [Power on] is set to [Auto] and there is a power outage, the projector will come on
once power is restored.
Description
Screen shrinking at top
and switch with
and
.
Off/Green/Black/Brown/Blue/Beige
Off (not turned off)
Input select menu
Input select
Computer 1
Y/P
B
Computer 2
Y/P
B
Video
S-video
buttons and press
button.
/
shows whether signal is
input or not.
41
On
Off
30 min.
On
Off
On
Off
Manual
Auto
/P
1
R
/P
2
R
Advertisement
Table of Contents
