Table of Contents
Advertisement
PIP menu setting
When a PIP sub-picture is displayed, the PIP menu screen will appear if you press the MENU button.
You can make the PIP sub-picture settings and the sound settings when a PIP subpicture is displayed.
To cancel the menu, press the EXIT button.
Source
Select the signal source for PIP sub-picture.
Video
SET
: Video input is selected as signal source.
S-Video
SET
: S-Video input is selected as signal source.
Size
Set the PIP sub-picture size.
Small
SET
: The PIP sub-picture size is set to small.
Middle
SET
: The PIP sub-picture size is set to medium.
Large
SET
: The PIP sub-picture size is set to large.
Position
Set the PIP sub-picture display position.
SET
:The sub-picture is displayed at the upper left of the screen.
SET
:The sub-picture is displayed at the upper right of the screen.
SET
:The sub-picture is displayed at the lower left of the screen.
SET
:The sub-picture is displayed at the lower right of the screen.
Audio
Select the audio input source.
Main
SET
: The sound of the main picture is emitted from the speaker.
Sub
SET
: The sound of the sub picture is emitted from the speaker.
Reset
EXEC.
Return the settings of PIP MENU to the factory default setting.
Notes
• The size of the PIP sub-picture differs according to the signal type (resolution) of the main picture.
• When the PIP sub-picture is turned off, the audio input source returns to the previous source (main picture).
• The settings made are memorized automatically when the power is turned off by pressing the ON/STANDBY button. If the power cord is unplugged or if a
power failure occurs while the projector is on, the settings are not memorized.
53
CONTENTS
Advertisement
Table of Contents
