Related Manuals for Toshiba TLP-XE30
Summary of Contents for Toshiba TLP-XE30
- Page 1 TLP-XE30 DATA PROJECTOR OWNER’S MANUAL In the spaces provided below, record the Model and Serial No. located at the bottom of your projector. Model No. Retain this information for future reference. Serial No.
-
Page 2: Before Using
Phone: (949) 583-3000 Changes or modifications made to this equipment, not expressly approved by Toshiba, or parties authorized by Toshiba, could void the user’s authority to operate the equipment. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil... -
Page 3: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS GIVEN IN THIS OWNER'S MANUAL AND THOSE MARKED ON THE UNIT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE. This unit is fully transistorized and does not contain any parts that can be repaired by the user. - Page 4 IMPORTANT SAFETY INSTRUCTIONS (Continued) 11. Lightning storms 14. Do not place the product vertically For added protection for this product during a storm, or when it Do not use the product in the is left unattended and unused for upright position or any other long periods of time, unplug it from vertical positions to project the the wall outlet.
-
Page 5: Power Supply Information
IMPORTANT SAFETY INSTRUCTIONS (Continued) 21. Replacement Parts 24. Do not use the product in a closed installation When replacement parts are required, be sure the service location. technician has used replacement Do not place the product in a box parts specified by the or in any other closed installation manufacturer or have the same location. -
Page 6: Contents
EXEMPTION CLAUSES • Toshiba Corporation bears no responsibility in the case of damages arising from natural disaster such as earthquakes, lightning, etc., fire not liable to Toshiba Corporation, acts by third parties, other accidents, or use under abnormal conditions including erroneous or improper operation and other problems. -
Page 7: Table Of Contents
CONTENTS Before Using SAFETY PRECAUTIONS ... 2 IMPORTANT SAFETY INSTRUCTIONS ... 4 POWER SUPPLY INFORMATION ... 9 IMPORTANT PRECAUTIONS ... 9 EXEMPTION CLAUSES ... 10 OTHER INFORMATION ... 10 REMOTE CONTROL BATTERIES ... 11 CONTENTS ... 12 Preparations Checking the package contents ... 14 Names of each part on the main unit ... -
Page 8: Preparations
Preparations Checking the package contents Please make sure that the following items are included in the box, along with the main unit. If any item is missing, immediately contact the store where you purchased the product. ■ ■ ■ ■ (1) Remote control (4) Owner’s Manual ■... -
Page 9: Names Of Each Part On The Control Panel And Remote Control
Names of each part on the control panel and remote control Control panel Remote Control (12) (9) (5) (10) (11) (17) (15) (16) (7) (6) (4) (3) Name : Main Function Control panel (1) ENTER button : Accepts the selected mode. (2) MENU button : Displays menus. -
Page 10: Names Of The Terminals On The Rear Panel
Names of the terminals on the rear panel Name : Main Function (1) CONTROL terminal : When operating the projector via a computer, connect this to the controlling computer’s RS-232C port. (2) AUDIO (L/R) terminal : Input audio signals from video equipment. (3) VIDEO terminal : Input video signals from video equipment. -
Page 11: Placement
Placement Placement Styles As shown in the figures below, this device can be placed in 4 different styles. The factory setting is “floor-mounted front projection.” Set the [Projection mode] in the Default setting 2 menu, in accordance with your needs. Floor-mounted front projection Floor-mounted rear projection Ceiling-mounted front projection... -
Page 12: Operations
Connection (Continued) Notes • When COMPUTER 2 IN terminal (also used for MONITOR OUT terminal) is used as MONITOR OUT terminal, the signal which is input to COMPUTER 1 IN terminal is output. • Signals are output from MONITOR OUT terminal even in standby mode. However, from AUDIO OUT terminal, no audio signal is output. -
Page 13: Basic Operations
Turning the power on and off (Continued) Notes • The start-up screen will disappear after a moment. You can dismiss the start-up screen before this by performing any operation. You can also configure the system to prevent the start-up screen from appearing. To do this, use the Display setting menu •... -
Page 14: Using Handy Features
Basic operation (Continued) Projector placement angle adjustments The placement angle and the height of the projected image can be adjusted by the foot adjuster. q Lift up the front of the projector to the desired angle, then press the foot adjuster release button. The foot adjuster extends. -
Page 15: Resizing Image
Using handy features (Continued) Adjusting Keystone distortion [Auto] Press the button. The keystone distortion is automatically corrected. The correction. When adjustment is finished, the Keystone menu appears again. For fine adjust- ment, select [V-keystone] by the button and adjust image manually by the buttons. -
Page 16: Changing Screen Size
Using handy features (Continued) ■ Changing screen size The screen size for the projected image can be changed. Press the remote control’s SCREEN SIZE button. Pressing the button switches Full/Thru/Wide in turn. Notes • Thru display is available for computer-input images. •... - Page 17 Using handy features (Continued) How to set password (from [Off] to [On]) Select [Password] in the Default setting 2 menu and press the button. Select [Password setting] in the password registration, setting menu, and press the button. Select [On]. Select [OK] and press the button.
-
Page 18: Using The Menus
Using the menus You can call up on-screen menus, and conduct a number of adjustments and settings using the operation buttons on the control panel (main unit side) and remote control. p.16 ■ How to use the menus The menu shown below is for operation instructions purposes and might differ from the actual display. -
Page 19: The Display Setting Menu
Using the menus (Continued) Item Description Computer Y/P Position V-position Adjust the vertical position of the image. Clamp 1 Adjusts the clamp pulse position. Clamp 2 Adjusts the clamp pulse width. *1: [Noise reduction] may not work depending on signal type. *2: [[NTSC mode] can be displayed and adjusted only when the video signal is set to [NTSC] or [NTSC4.43]. - Page 20 [Background] • TOSHIBA is set for [Logo] by factory setting. • If user’s logo has been registered, it is displayed when [Logo] is set for background.
-
Page 21: The Default Setting Menu
Using the menus (Continued) ■ The default setting menu This menu shows placement status and other settings. Default setting 1 menu Item Description No signal Set the time to wait for the power to be turned off after the last power off operation is made with no input signal. -
Page 22: Displaying Information (Status Display)
Using the menus (Continued) ■ Displaying Information (Status display) This displays information about the input signal, lamp use time, etc. Item Description Computer Y/P Projector Input Input source name Mode name RGB input mode [Note 1] Resolution Resolution (in dots) Frequency Sync frequency Sync... -
Page 23: Lamp Replacement
If this happens, replace it with a new one. WARNING • If the projector is mounted on the ceiling, it is recommended to use your Toshiba dealer- ship when the lamp has to be exchanged. -
Page 24: Air Filter Cleaning
Air filter cleaning The air filter prevents dust and debris from getting inside the projector. Never run the projector with the filter removed. It is recommended that the air filter is cleaned regularly. • The message “Check the air filter for dirt.” is displayed every 100 hours. (If the usage time exceeds 100 hours, this message is displayed for about 30 seconds when the image is displayed for the first time after power is turned on. -
Page 25: Others
Others Trouble indications The indicator lights to inform you of internal abnormalities. No power ⇒ Problem with projector (Off) • Unplug the power cord, and contact your dealer. Lamp went out during use, or won’t come on ⇒ Lamp temperature is high so that it is difficult to turn on, the lifetime of the (Red (Red lit) lamp has ended or the projector is malfunctioning. -
Page 26: List Of Supported Signals (Rgb Signals)
Specifications ■ List of general specifications Item Specification Consumption Power 320 W Weight 2.8 kg External Dimensions 288 × 92 × 247 mm (W × H × D) (including protruding parts) Cabinet material PC resin and PC+ABS resin Conditions for usage environment Temp: 5°C to 35°C; relative humidity: 30% to 70% Display method 3-panel transmission Panel size 0.63 type... -
Page 27: List Of Supported Signals) (Y/P Signals))
Specifications (Continued) ■ List of supported signals (Y/P signals) Signal format fh(kHz) 480i(525i)@60Hz 15.73 480p(525p)@60Hz 31.47 576i(625i)@50Hz 15.63 576p(625p)@50Hz 31.25 720p(750p)@60Hz 45.00 720p(750p)@50Hz 37.50 1080i(1125i)@60Hz 33.75 1080i(1125i)@50Hz 28.13 ■ List of supported signals (Video, S-Video signals) Video mode fh(kHz) fv(Hz) NTSC 15.73 15.63...
Need help?
Do you have a question about the TLP-XE30 and is the answer not in the manual?
Questions and answers