Table of Contents
Advertisement
Preparation of the document imaging camera
Before preparations
(stowed away)
4) Open the camera head.
Notes
• Never give shocks or impacts to the camera or arm as this may cause malfunction.
• While raising up or turning the arm, the arm moves describing an arc, be careful not to hit your face or your body.
• The figures above are procedures of putting materials on the projector. When the stability of materials is required or the light of the indicator is visible
through the materials, place the materials at the back of the projector and set the arm and camera head over them.
1) Raise up the arm.
5) Turn the camera head.
2) Extend the arm.
6) Pull up the light.
CONTENTS
3) Turn the arm.
7) Turn the light.
55
Advertisement
Table of Contents
