Default Setting Menu - Toshiba TDP-B1-US Owner's Manual

Using the menus (continued)

Default setting menu

Item
Projection mode
Language
Start-up screen
Auto input search
Fan mode
Lamp power
Power on
Reset all
Note
• Set Fan mode to [High] when the altitude is 600m (2,000 ft.) or higher, however, do not
set Fan mode to [High] when using the projector at a lower altitude.
• Note that if [Power on] is set to [Auto], then if the power is supplied when restored after
a power outage, the projector will come on.
Downloaded from www.Manualslib.com
Sets projection mode in accordance with
Placement Styles.
(Standard)
Select one of the languages below for the menu
and messages.
: Enter setting mode] J[
[
[ : Apply]
English/ Français/ Deutsch/ Italiano/ Español/
Português/
Dansk/ ýeština/ Magyar/ Nederlands/ Suomi/
Norsk/
/
Display start-up screen when power is turned on.
On Off
Set whether the input with signals is only
selected or not.
On Off
Sets the cooling fan speed.
[Note]
Standard
Sets the lamp power.
Normal
Sets whether to turn on the power when the ON/
[Note]
STANDBY button is pressed (Manual), or when
the power is supplied (Auto).
Manual
Press . (The language is not reset.)
Resets all adjustments and settings to their
factory settings.
Yes No
manuals search engine
Description
p.24
(Rear)
:Selection]J
/ Svenska/ Türkçe/ Polski/
/ Român / /
/ Bahasa Indonesia
High
Low
Auto
36
RGB Y/P /P Video
B R
Yes Yes Yes
Yes Yes Yes
Yes Yes Yes
Yes Yes Yes
Yes Yes Yes
Yes Yes Yes
Yes Yes Yes
Yes Yes Yes
USB
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes