Care And Maintenance; Cleaning The Housing; Cleaning The Grease Filters - privileg SY-3503A-P1-C81-L22-600 User Manual

Page EN-16

Care and maintenance

WARNING
Risk of injury!
Disconnect the mains plug before
■
cleaning the exhaust hood or chang-
ing fi lters. If the mains plug is diffi cult
to access, switch off or pull out the
corresponding fuse.
CAUTION
Fire hazard!
Improper handling of the appliance
or incorrect maintenance can result in
grease residue catching fi re.
Grease residue on the exhaust hood
■
or in the grease fi lters can catch fi re
if exposed to high temperatures. For
this reason, clean the surfaces of the
exhaust hood and grease fi lters reg-
ularly.

Cleaning the housing

NOTICE
Risk of damage to property!
Do not use any sharp objects or scour-
■
ing powders, as these can scratch the
surface.
We recommend cleaning the surfaces of the
exhaust hood after every use.
• Wipe the surfaces with a soft, damp cloth
and a little dishwashing detergent.
• Clean glass surfaces with standard glass
cleaner.
196366_EN_20190108.indd EN-16 196366_EN_20190108.indd EN-16
Care and maintenance

Cleaning the grease filters

NOTICE
Risk of damage to property!
Handle the grease fi lters carefully to
■
avoid bending or creasing the fi ne
mesh.
Only reinsert the grease fi lters after
■
cleaning once they are fully dry.
Clean the grease filters once a month – or
more frequently if necessary – in the dish-
washer (up to 60 °C), or soak in lukewarm
water with detergent.
1. Unplug the mains plug or switch off the
corresponding circuit.
2. Push back the lock on the grease fil-
ters (9) and carefully remove the grease
filters.
3. Wash the grease filters in a dishwasher or
in the sink like ordinary dishware.
4. Re-insert the grease filters once they
are completely dry. To do this, insert the
grease filters in the recess below.
5. Push the lock back, press the grease
filters upwards and release the lock. The
grease filters will snap into place.
6. Switch the power back on.
(9)
08.01.2019 14:02:50 08.01.2019 14:02:50