Care And Maintenance; Cleaning The Housing; Cleaning The Grease Filters - privileg SY-103G1-E1-C59-L52-900 User Manual

Care and maintenance

WARNING
Risk of injury!
Before cleaning the exhaust hood or
■
changing the fi lter, pull out the mains
plug. If the mains plug is diffi cult to
access, switch off the corresponding
fuse or pull it out.

Cleaning the housing

WARNING
Fire hazard!
Improper handling of the appliance
or incorrect maintenance can result in
grease residue catching fi re.
Grease residue on the exhaust hood
■
or in the grease fi lters can catch fi re
if exposed to high temperatures. For
this reason, clean the surfaces of the
exhaust hood and grease fi lters reg-
ularly.
• Wipe the surfaces with a soft, damp cloth
and a little dishwashing detergent. Do not
use any sharp objects or scouring pow-
ders, as these can scratch the surface.
• Clean glass surfaces with standard glass
cleaner.
Care and maintenance

Cleaning the grease filters

NOTICE
Risk of damage to property!
Handle the grease fi lters carefully to
■
avoid bending or creasing the fi ne
mesh.
Only reinsert the grease fi lters after
■
cleaning once they are fully dry.
Clean the grease filters once a month – or
more frequently if necessary – in the dish-
washer (up to 65 °C), or soak in lukewarm
water with detergent.
1. Unplug the mains plug or switch off the
corresponding circuit. g
(12)
2. Lift the cover (12) up. ( )
(13)
3. Push back the lock (13) on the grease
filters (14) and carefully pull the grease
filters (14) downwards to remove them.
4. Wash the grease filters (14) in a dish-
washer or in the sink like ordinary dish-
ware.
Page EN-17
(14)