Installing The Flue Screen - privileg SY-3503A-P1-C81-L22-600 User Manual

Installing the flue screen

If the socket is outside the area for the
fl ue screen, leave at least 5 cm room
between the ceiling and the wall mount (5).
(5)
1. Hold the wall mount (5) horizontally
against the wall at the desired flue height
so that the centre of the wall mount aligns
with the vertical guide line.
2. Mark both drill holes.
3. Drill holes with a diameter corresponding
to the dowel into the wall at each of the
marked points.
4. Hammer two dowels into the holes.
(5)
5. Screw the wall mount (5) to the wall with
two screws.
196366_EN_20190108.indd EN-13 196366_EN_20190108.indd EN-13
guideline
Assembly
(8) (6)
6. Screw the retaining plate (6) onto the
lower half of the flue screen (2) with two
screws (8).
7. Place the flue screen (2) on the top of
the exhaust hood.
8. Draw two drill holes.
9. Remove the flue screen.
10. Drill holes with a diameter corresponding
to the dowel into the wall at each of the
marked points.
11. Hammer two dowels into the holes.
12. Place the flue screen on the exhaust
hood again.
13. Screw the flue screen to the wall with
two screws.
Page EN-13
(2)
(2)
08.01.2019 14:02:45 08.01.2019 14:02:45