Default Setting Menu - Toshiba TDP-P9 Owner's Manual

Using the menus (continued)

Default setting menu

Item
Projection mode
Language
Start-up screen
Auto input search
[Note]
Fan mode
Lamp power
[Note]
Power on
Reset all
Note
• Set Fan mode to [High] when the altitude is 600m (2,000 ft.) or higher, however, do not
set Fan mode to [High] when using the projector at a lower altitude.
• Note that if [Power on] is set to [Auto], then if the power is supplied when restored after
a power outage, the projector will come on.
Description
Sets projection mode in accordance with
p.24
Placement Styles.
(Standard)
Select one of the languages below for the menu
and messages.
: Enter setting mode] J[
[
[ : Apply]
English/ Français/ Deutsch/ Italiano/ Español/
Português/ / Svenska/ Türkçe/ Polski/
Dansk/ ýeština/ Magyar/ Nederlands/ Suomi/
Norsk/ / Român /
/ / Bahasa Indonesia
Display start-up screen when power is turned on.
On Off
Set whether the input with signals is only
selected or not.
On Off
Sets the cooling fan speed.
Standard High
Sets the lamp power.
Normal Low
Sets whether to turn on the power when the ON/
STANDBY button is pressed (Manual), or when
the power is supplied (Auto).
Manual Auto
Press . (The language is not reset.)
Resets all adjustments and settings to their
factory settings.
Yes No
36
RGB
Yes
(Rear)
Yes
:Selection]J
/
Yes
Yes
Yes
Yes
Yes
Yes
Y/P /P Video USB
B R
Yes Yes Yes
Yes Yes Yes
Yes Yes Yes
Yes Yes Yes
Yes Yes Yes
Yes Yes Yes
Yes Yes Yes
Yes Yes Yes