Using Usb Memory - Toshiba TDP-P9 Owner's Manual

Using USB Memory

Connect the USB memory to the projector and select USB input
Press INPUT button to select USB source.
Plug the USB memory to the USB port.
Note
• USB HDD or hub is not supported.
• If Quick Start is set to "On" and the source
other than USB memory is input, the
slideshow will automatically play back
when USB memory is plugged in. After that if the source is switched to USB, the first
slide may not be displayed or the slideshow may be ended.
File View Mode
M When Quick Start sets to "On" and there is JPEG file(s) in the root folder of the USB
memory, the slideshow starts automatically
N When Quick Start sets to "Off" or there is no JPEG file in the root folder of the USB
memory, the file list appears as below (file view mode).
Information of the
selected file
To the upper level
folder
Selected file/folder
Thumbnail display
No more files exist
Note
• If there are many files in the folder, it takes long time to show the file names and
thumbnails.
• 2-byte characters are not supported and will be displayed as "?".
• Only folders, JPEG files or supported movie files can be displayed in the file list, other
file formats are not displayed.
• Thumbnail may not be displayed due to different file formats.
Current folder
\
001/025 1027001.JPG
2005/06/28
793600 Bytes
UI 001
1027001 1027002
1027005 1027006
JPEG file
38
.
p.35
Selected file/Total files
1544x1024
002
1027003 1027004
1027007 1027008
USB memory
Selected file
Folder
Movie file
Next file exists
Unsupported file