Preparing And Using The Remote Control - Toshiba TDP-P9 Owner's Manual

Preparing and using the remote control

„
Loading dry-cell batteries into the
remote control
M Remove the battery cover.
N Insert the dry-cell batteries.
Be sure to align the plus and minus
ends of the batteries properly.
Two batteries (LR03, SIZE AAA) are
used.
O Replace the battery cover.
„
Operating the remote control
Turn on the ON/OFF switch of the remote
control.
Point toward the projector's infrared
remote sensor, and press a button on
the remote control.
• Operating the projector from the front
• Operating the projector from the rear
21
Approx. 15°