Loading Paper; Loading Trays - Lexmark XC4240 Quick Reference

5
Select the print job type (Confidential, Repeat, Reserve, or
Verify).
If the print job is confidential, then enter a four ‑ digit PIN.
6
Click OK or Print.
7
From the printer home screen, release the print job.
•
For confidential print jobs, navigate to:
Held jobs > select your user name > Confidential > enter
the PIN > select the print job > configure the settings >
Print
•
For other print jobs, navigate to:
Held jobs > select your user name > select the print job >
configure the settings > Print
For Macintosh users
1 With a document open, choose File > Print.
If necessary, click the disclosure triangle to see more options.
2 From the print options or Copies & Pages menu, choose Job
Routing.
3 Select the print job type (Confidential, Repeat, Reserve, or
Verify).
If the print job is confidential, then assign a user name and a
four ‑ digit PIN.
4 Click OK or Print.
5 From the printer home screen, release the print job.
•
For confidential print jobs, navigate to:
Held jobs > select your user name > Confidential > enter
the PIN > select the print job > configure the settings >
Print
•
For other print jobs, navigate to:
Held jobs > select your user name > select the print job >
configure the settings > Print

Loading paper

Loading trays

CAUTION—TIPPING HAZARD: To reduce the risk of
equipment instability, load each tray separately. Keep all
other trays closed until needed.
1
Remove the tray.
Note: To avoid paper jams, do not remove trays while the
printer is busy.
2
Adjust the guides to match the size of the paper that you are
loading.
Note: Use the indicators on the bottom of the tray to position
the guides.
3 Flex, fan, and align the paper edges before loading.
2
4
Load the paper stack with the printable side faceup, and then
make sure that the side guides fit snugly against the paper.
Notes:
•
Load letterhead faceup with the header toward the front
of the tray for one ‑ sided printing.
•
Load letterhead facedown with the header toward the
back of the tray for two ‑ sided printing.
•
Do not slide paper into the tray.
•
To avoid paper jams, make sure that the stack height is
below the maximum paper fill indicator.
5 Insert the tray.
If necessary, set the paper size and paper type from the control
panel to match the paper loaded.