Table of Contents
Advertisement
♪: The icons do not change when an insert connection is used for input channels 1-4.
Inputs 5-8: Menu options
Input pairs 5-6 and 7-8 have drop-down menus that specify the type of device that is
connected.
For Inputs 5-6 the options are Line TRS, Line RCA, and Phono. Connect a device to the 1/4"
jacks or the RCA jacks (not both) and then select one of the following:
Line TRS: Use this with a balanced or unbalanced line-level input such as a
•
keyboard, drum machine, etc.
Line RCA: Use this with a consumer line-level input such as a the output of a CD
•
player, etc. (-10dBV).
Phono is for use with a turntable. Be sure to use the GND connector on the
•
rear panel of the AudioFuse Studio when connecting a turntable. See the
documentation for those devices to determine the optimal connection method.
For Inputs 7-8 the choices are TRS Line or Bluetooth.
TRS Line: Use this setting to connect a line-level input such as a keyboard, drum
•
machine, etc.
Bluetooth: Use this when pairing the AudioFuse Studio with a Bluetooth device.
•
♪: If you're using a pre-amp for your instrument, such as the output of an effects unit, you may be
able to use the Line setting instead.
2.4.1.2. Digital Inputs
This section only has LED level meters. They display the signal levels for each of the
incoming ADAT tracks and the SPDIF input. There are no other functions available; what
they get is what you see. When no valid incoming digital signals are detected, the Digital
Inputs label and icon are greyed.
54
Arturia - User Manual AudioFuse Studio - AudioFuse Control Center
Hide quick links:
Advertisement
Table of Contents
