Arturia AUDIOFUSE STUDIO User Manual page 15


♪: During a mixing session, many engineers like to perform a "mono compatibility" check to ensure
that mixes will translate well onto mono sources (like many phones, laptops or portable Bluetooth
speakers). It is also easier to spot spectral balance problems and phase-related issues in mono. The
Mono button provides an easy way to ensure a mix will translate well.
Speaker Selector: This button lets you easily A/B your mix on two different sets
•
of speakers. The currently active speaker is indicated by its corresponding LED.
Main / Cue 1 / Cue 2 buttons: These three buttons select which mix is sent to
•
your speakers. The three mixes can be adjusted in the AudioFuse Control Center
software. Please refer to that
A6. Bluetooth Button: This button switches Bluetooth functionality on and off. When switched
on, the button is illuminated and the Bluetooth audio stream is decoded by the AudioFuse
Studio. The AudioFuse Studio is discoverable by Bluetooth enabled devices like your
smartphone or tablet. This allows you to wirelessly connect to AudioFuse Studio so you can
play music through the studio's sound system. The routing of incoming Bluetooth signals
can be configured in the AudioFuse Control Center software under Settings (Gear Icon) >
Audio Settings > Bluetooth. Please refer to the
for more information.

!: A long press on the Bluetooth button resets the on-going connection and enables pairing with a
new device.
A7. Clock Source and USB Indicators: These LEDs indicate the source of the digital clock
(internal, ADAT, SPDIF or Word Clock) and the status of the USB connection.
The USB LED is illuminated when the connection is OK and blinks if there is either a problem
with the USB connection or there is no USB connection at all to the computer. You can
select the clock source of AudioFuse Studio in the AudioFuse Control Center software under
Settings (Gear Icon) > Audio Settings > Clocks. The selected external clock LED blinks if
lost or incorrect. In this situation, the unit automatically switches to Internal clock at the
same sample rate. Please refer to the
information.
A8. AudioFuse Studio Button: This button opens and closes the AudioFuse Control Center on
your computer.
Arturia - User Manual AudioFuse Studio - AudioFuse Studio
application's User Manual [p.30]
AudioFuse Control Center User Manual [p.45]
AudioFuse Control Center User Manual [p.45]
to learn more.
for more
9