How To Use Audiofuse Studio; How To Record With A Microphone - Arturia AUDIOFUSE STUDIO User Manual

1.4. How to use AudioFuse Studio

1.4.1. How to record with a microphone

1. Connect your microphone to AudioFuse Studio with an XLR cable. You can use
any input on the front panel.
2. AudioFuse Studio will auto-detect that you have connected an XLR cable and the
Mic LED will light up in the Input Channel section.
3. If your microphone requires phantom power, press the 48V button to switch on
phantom power.
4. Talk or sing into the mic while adjusting the gain knob. The loudest parts of your
performance should cause the channel's VU meter to peak between -10 and
-6dB.
5. If your sound source is so loud that it overloads the VU meter even at the lowest
gain setting, press the Pad button to switch on the 20dB input gain reduction.
Note that the CLIP LED will light up when the input signal reaches 1dB before
distortion.
That's it! The microphone input should be available in your music software and ready to
record. Please refer to your software's user guide if you have any questions about how to
record.
16 Arturia - User Manual AudioFuse Studio - AudioFuse Studio