Front View - Arturia AUDIOFUSE STUDIO User Manual

It is a handy shortcut to accessing the Control Center application without having to use your
computer's mouse or trackpad.

1.2.2. Front View

B1. Input channels 1-4: Connect microphones, instruments or line-level devices to these four
inputs. The "combo" style connectors accept XLR (microphone) or 1/4" (instrument or line-
level) inputs. Each channel has its own Input Control Section directly above it on the front
panel so you can set things like input gain or monitor incoming levels. See callout A1 above
to learn more about the Input Control Section.
B2. Headphone Outputs: Connect your headphones here. AudioFuse Studio has two
independent headphone ("cue") outputs and each output has both 1/4" and 1/8" connectors
so you never have to worry about losing headphone adapters. The Phones Control Section
directly above these connectors on the front panel lets you set the output level, select the
signal source and set mono/stereo operation. Refer to callout A3 above to learn more about
the Phones Control Section.

♪: The 1/4" and 1/8" headphone outputs have different impedance values so that you can connect
virtually any kind of headphone to AudioFuse Studio. The 1/4" are optimized for high impedance
headphones (30-600 ohm) and have a 13 dBu maximum output level. The 1/8" connectors are optimized
for low impedance headphones (8-120 ohm) and have a 10 dbU maximum output level.
10 Arturia - User Manual AudioFuse Studio - AudioFuse Studio