Arturia AUDIOFUSE STUDIO User Manual page 13

This functionality lets you really focus in and hear what is being recorded without having
to hear anything else. Press the button to switch Listen mode on and off. The button is
illuminated when the mode is active.

♪: The functionality of this button can be adjusted in the AudioFuse Control Center application under
Settings (Gear Icon) > Audio Settings > Listen button. Please refer to the AudioFuse Control Center section
for more information:
A3. Phones Control Section: This section contains two identical sets of controls pertaining to
the headphone outputs on the front panel (see callout B2).
Level Knob: This knob sets the level for its associated headphone outputs.
•
Mono Button: This button engages and disengages Mono mixdown mode for
•
its associated headphone output. When switched on, the button is lit and the
headphone mix is heard in mono. When switched off, the mix is heard in stereo
(or as recorded)

♪: Being able to quickly monitor in mono can be a very useful feature in both recording and mixing
situations. While recording, singers sometimes prefer to perform with headphones only on one ear so
that they can hear themselves better. A mono mix ensures that the singer hears everything in the mix
even if they are only using one ear to hear playback. During a mixing session, many engineers check
for spectral balance and phase problems by listening to a mono mix. In both cases, the Mono button
provides an easy way to temporarily monitor in mono.
Arturia - User Manual AudioFuse Studio - AudioFuse Studio
here [p.45].
7