Firmware Updates - Arturia AUDIOFUSE STUDIO User Manual

2.3.5. Firmware Updates

The AFCC will let you know when a new version of the firmware for your device becomes
available. This is the page you will use for the update process. Once the file has been
downloaded to your computer, click "Upgrade from File" to navigate to the file location. Select
the file with the proper extension (.bin for AudioFuse, .afstudio for the AudioFuse Studio,
.af8pre for the AudioFuse 8Pre) and follow the instructions.
When updating the firmware for any AudioFuse device, the unit must be powered by both
connectors (USB and DC).

!: CAUTION: During the firmware update process the AudioFuse device will reboot two times. It is
highly recommended to turn the volume on your monitors down all the way to prevent damage to your
speakers.
During the upgrade process you will be shown a progress bar that indicates how far along
in the process the unit is.
The firmware upgrade in progress
You'll know the upgrade is complete when the progress bar is replaced with the word
"Success":
52 Arturia - User Manual AudioFuse Studio - AudioFuse Control Center