Operation (Automatic Mode); Cooking With Con@Ctivity (Automatic Mode) - Miele DA 3668 Operating And Installation Instructions

Operation (automatic mode)

When Con@ctivity is active, the
rangehood always operates in
automatic mode (see "Setting up
Con@ctivity").
If you wish to manually operate the
rangehood, see "Cooking without
Con@ctivity".
Cooking with Con@ctivity
(automatic mode)
 Switch a cooking zone on any power
setting.
The cooktop lighting will come on.
After a few seconds the fan will come
on, first at power level 2, then it will
switch immediately to power level 1.
The deflector plate will come out.
The rangehood selects the power
setting automatically during cooking.
This is determined by the total output of
the cooktop, i.e. the number of cooking
zones in operation and the power
settings selected.
 If you select a higher power setting
on the cooktop or are using several
cooking zones, the rangehood will
switch to a higher power setting.
 When you reduce the power setting
on the cooktop or the number of
cooking zones being used, the
rangehood power setting will also be
reduced.
30
Examples for power levels 1 to B
Reaction time
The rangehood reacts with a slight
delay because altering the power
setting on the cooktop does not
immediately result in a reduction or
increase in cooking vapours.
Because the cooktop transmits the
information to the rangehood at
intervals, this can also cause delays.
The reaction can vary from a few
seconds to a few minutes.