Miele DA 3668 Operating And Installation Instructions page 25

Activating the rangehood
 The cooktop and rangehood must be
switched off.
 Press the run-on control  for
approx. 10 seconds until 1 lights up.
 Then press in turn:
- the  control,
- then the  control,
- then the lighting control .
The rangehood is now in signing on/off
mode.
If a radio frequency connection has not
yet been established, 2 and 3 will flash
at the same time.
If a radio frequency connection has
already been established, 2 and 3 will
light up constantly (Con@ctivity 2.0 is
already activated or a remote control is
signed on).
Before using for the first time
 To activate Con@ctivity 2.0 press the
 control.
2 will light up constantly, 3 will flash on
and off.
After a few seconds 2 and 3 will light up
constantly, B will flash on and off.
The search for a radio frequency
connection will start.
Activating the cooktop
 While the rangehood is searching for
a signal, start activating the cooktop.
For further details, see the cooktop
operating instructions.
 When the cooktop registers that a
connection has been established, exit
activation on the cooktop.
25