Signing On/Off The Remote Control - Miele DA 3668 Operating And Installation Instructions

 Press the  control to deactivate
Con@ctivity 2.0.
2 will light up constantly, 3 will flash on
and off.
After a few seconds 2 and 3 will start
flashing on and off.
The radio frequency connection has
been deactivated.
 To deactivate the cooktop, please
refer to the operating instructions
supplied with it.
Please bear in mind that disabling the
signal will also disable any remote
control function and this will have to
be activated again.
Before using for the first time
Signing on/off the remote
control
If the connection has been lost between
the remote control and the rangehood,
the remote control and the remote
control function on the rangehood must
be signed on again. To do this the
remote control on the rangehood and
the remote control must first be signed
off.
Note that disabling the signal will also
deactivate any Con@ctivity 2.0
function and this will have to be
activated again.
 Manually switch the rangehood off.
The deflector plate must be retracted.
 Remove the grease filters.
The controls are accessible via the slots
for the grease filters.
27