Miele DA 3668 Operating And Installation Instructions page 52

Installation
52
Repositioning the ducting
The fan can be rotated to allow the
ducting to be fitted at the back of the
rangehood. This may be necessary if for
example the rangehood is being fitted in
a reduced height wall unit.
Repositioning is carried out before
installing the rangehood.
The rangehood must be
disconnected from the electricity
supply.
 Undo the fixing screws on the front
panel of the rangehood housing and
remove the panel.
 Undo the screws from the cover on
the back of the rangehood housing
and remove the cover.
 Unscrew the fixing screws on the fan
unit.
 Turn the fan towards the rear and
position the exhaust socket in the
cut-out in the back panel of the
rangehood housing. Ensure when
turning the fan that the connection
cable does not become detached.
 Secure the fan in its new position.
 Now secure the cover taken from the
back panel to the top of the housing.
 Refit the front panel and secure it
using the screws.