Operation (Automatic Mode); Cooking With Con@Ctivity (Automatic Mode) - Miele DAS 4940 Operating And Installation Instructions

Operation (Automatic mode)

When Con@ctivity is active, the
cooker hood always operates in
automatic mode (see "Before using for
the first time" – "Setting up
Con@ctivity").
If you wish to manually operate the
cooker hood, see "Operation (Manual
mode)" – "Cooking without
Con@ctivity".
Cooking with Con@ctivity
(Automatic mode)
 Switch a cooking zone on at the
desired power level.
The cooker hood lighting will come on.
 Pull out the deflector plate.
The fan will come on at power level 2.
The cooker hood selects the fan power
level automatically during cooking.
This is determined by the total output of
the hob, i.e. the number of cooking
zones in operation and the power levels
selected.
 If you select a higher power level or
are using several cooking zones on
the hob, the cooker hood will switch
to a higher fan power level.
 When you reduce the power level or
the number of cooking zones on the
hob, the fan power level is also
reduced.
24
Examples for power levels 1 to B
Reaction time
The cooker hood reacts with a slight
delay because altering the power level
on the hob does not immediately result
in a reduction or increase in cooking
vapours.
Because the hob transmits the
information to the cooker hood at
intervals, this can also cause delays.
The reaction can vary from a few
seconds to a couple of minutes.