Con@Ctivity Via A Direct Wi-Fi Connection (Con@Ctivity 3.0) - Miele DA 3668 Operating And Installation Instructions

Con@ctivity via a direct Wi-Fi
connection (Con@ctivity 3.0)
Prerequisite:
- Wi-Fi enabled Miele cooktop
If you do not have a home network, you
can establish a direct connection
between the cooktop and the
rangehood.
See the cooktop operating instructions
for details on how to connect them.
Instructions on how to connect the
rangehood are repeated in detail below.
 Sign off the remote control (see
"Signing off the remote control").
 Manually switch the rangehood off.
 Press and hold the  control.
 Press the  control at the same time.
2 will light up constantly, 3 will flash on
and off.
The rangehood is ready for connection
during the next two minutes.
Before using for the first time
 Start Wi-Fi connection on the
cooktop. For further details, see the
cooktop operating instructions.
When successfully connected 2 and 3
will light up constantly.
 Quit connection mode on the
rangehood by pressing the run-on
control .
Con@ctivity has now been activated.
With a direct Wi-Fi connection, it is not
possible to connect the cooktop and
the rangehood to a home network.
Should this be required at a later date,
the direct Wi-Fi connection between
the cooktop and the rangehood must
be disconnected (see "Signing out of
Wi-Fi").
23