Approvals - Eaton ZB12 XTOB Series Manual

2 Engineering

2.4 Approvals

2.4 Approvals
38
The ZB12-.../XTOB...BC1 and ZB32-.../XTOB...CC1 overload relays are
compliant with IEC EN 60947 regulations for "low-voltage switchgear" and
meet the requirements of the 94/9/EU (ATEX 95) resp. 2014/34/EU directives
for the protection of Ex e motors.
Furthermore, motors can be explosion protected in zones 21 and 22 (areas
with combustible dusts) in compliance with EN 60079-14. The wiring of the
motor feeder must be carried out in accordance with IEC/EN 60947-1,
Table 9.
c
II(2)G [Ex d] [Ex e] [Ex px]
II(2)D [Ex p] [Ex t]
0102
The overload relays are UL and CSA approved for use in USA and Canada.
U s
Further approvals exist for:
China
Russia
Belarus
Kazakhstan
ZB12-..., ZB32-... 11/16 MN03407004Z-DE/EN www.eaton.com
PTB 10 ATEX 3010