Homematic IP HmIP-DRDI3 Installation And Operating Manual page 43

Hazard information
Only qualified electricians (to VDE 0100) are
permitted to carry out work on the 230 V mains.
Applicable accident prevention regulations must
be complied with whilst such work is being
carried out. To avoid electric shocks from the
device, please disconnect the mains voltage (trip
the miniature circuit-breaker). Non-compliance
with the installation instructions can cause fire or
introduce other hazards.
No SELV/PELV circuits may be connected to the
terminals of the inputs and outputs.
When connecting to the device terminals, take
the permissible cables and cable cross sections
into account.
Connected loads require sufficient insulation.
Exceeding this capacity could lead to the
destruction of the device, fires or electric shocks.
Please take the technical data (in particular the
maximum permissible switching capacity of the
load circuits and the type of load to be connected)
into account before connecting a load. Do
notexceed the capacity specified for the device.
43