Advertisement
Product Details
1. Yoke: For connecting the fixture to the light stand and adjusting the tilt and pan of fixture.
2. USB port: For updating controller firmware.
3. DMX IN: DMX signal input interface.
4. DMX OUT: DMX signal output interface.
5. Battery lock button: For installing and removing the battery.
6. Battery holder: For installing V-Mount battery (Not Included).
7. Angle fixing knob: For adjusting and fixing the tilt angle of fixture.
8. Fixture body handle: To lift the fixture and adjust the direction of the light.
9. User interface: For displaying & controlling various function operations and data.
10. Power indicator: For checking the status of the power input. If the indicator is always on, it means normal power supply; if the indicator is flashing or off, it means
abnormal power supply or no power input.
11. Power switch: For on/off the fixture.
12. DC IN: DC power input interface.
13. Bracket fixing knob: For connecting the fixture on a light stand.
Usage
1. Power Connection
①When connecting the power supply, please make sure the power, voltage and frequency is consistent with the provided power supply.
②When using a v-mount battery, please make sure to turn off the fixture and then plug in the battery.
Note: （1）Please do not use too much force when installing the battery properly.
（2）When removing the battery, make sure to press the battery unlock button to remove battery properly.
2. 2.4G Wireless Remote Control
MixPanel60/MixPanel150 is designed to work with a 2.4G remote controller or Nanlite WIFl-APP via WIFl transfer device to control light remotely.
NOTE: 2.4G remote controller or WiFi transfer device sold separately. (See separate instructions for remote controller or Wi-Fi transfer device)
4
1-
4+
4+
2-
3+
3+
DC IN
1-
2-
Advertisement
