Advertisement
·ADD-ON: PULSE/MIN is to adjust the times in one pulse cycle, the adjustment range is 1-240, 50 means there has 50 pulses in one cycle period.
EFFECT
HUE LOOP
DIM: 000%
EFFECT:
HUE1: 000
HUE2: 360
SPEED: 12s
MODE:
ADD-ON:
PULSE
PULSES/MIN: 50
PRESS "SELECT" TO RESTART FROM CCT1
Rotate "SELECT knob" to PULSE/MIN.
（2）CCT LOOP
·CCT LOOP has total two modes: ONE WAY and TWO WAY.
CCT LOOP has total three ADD-ON ways: OFF(only cycle),FLASH(cycle and flash),PULSE(cycle and pulse).
·Rotate "Dimmer knob", to adjust the brightness, rotate "SELECT knob" to select CCT1, CCT2, SPEED MODE, ADD-ON, then rotate "Function knob", to set up options
and parameter according to demands.
EFFECT
CCT LOOP
DIM: 000%
EFFECT:
CCT1: 2700K
CCT2: 7500K
SPEED: 02s
MODE:
ADD-ON:FLASH
INTERV ALS: 10.00s
PRESS "SELECT" TO RESTART FROM CCT1
Rotate "SELECT knob" to adjust the selection
（3）FLASH
·FLASH has total 2 modes: CCT, HSI.
·Rotate "Dimmer knob" to adjust the brightness, rotate "SELECT knob" to MODE, then rotate "Function knob", to select the flash mode CCT or
HSI according to demands.
·CCT mode, rotate "SELECT knob" to select CCT, G/M, INTERVALS, FLASH RATIO, PAUSE, then rotate "Function knob", to set up options and
parameter according to demands.
PAUSE: to select ON or OFF according to demands.
16
NORMAL
SAT: 100%
ONE WAY
CH:512
NORMAL
ONE WAY
RATIO: 050%
CH:512
NORMAL
EFFECT
HUE LOOP
DIM: 000%
EFFECT:
HUE1: 000
HUE2: 360
SAT: 100%
ONE WAY
SPEED: 12s
MODE:
ADD-ON: PULSE
PULSES/MIN:
50
PRESS "SELECT" TO RESTART FROM CCT1
CH:512
Rotate "Function knob" to adjust the times of pulse.
NORMAL
EFFECT
CCT LOOP
DIM: 000%
EFFECT:
CCT1: 2700K
CCT2: 7500K
ONE WAY
SPEED: 02s
MODE:
ADD-ON: FLASH
INTERV
ALS:10.00s
RATIO: 050%
PRESS "SELECT" TO RESTART FROM CCT1
CH:512
Rotate "Function knob" to set up options and parameter.
1 .
. .
.
240
Advertisement
