NANLITE MixPanel 60 User Manual page 18

·HSI mode, rotate "SELECT knob" to select HUE, SAT, INTERVALS, FLASH RATIO, PAUSE, then rotate "Function knob", to set up options and parameter according
to demands.
NORMAL
EFFECT
DIM: 000% EFFECT: FLASH
MODE:HSI HUE: 120 SAT: 100%
INTERVALS: 01.09s
FLASH RATIO: 098%
PAUSE: ON
CH:512
Rotate "SELECT knob" to adjust selection.
（4）PULSE
·PULSE has total two modes: CCT and HSI.
·Rotate "Dimmer knob" to adjust the brightness rotate "SELECT knob" to MODE, to select CCT and HSI.
·CCT mode, rotate "SELECT knob" to select CCT, G/M, PULSES/MIN, then rotate "Function knob", to set up options and parameter according to demands.
·HSI mode, rotate "SELECT knob" to select HUE, SAT, PULSES/MIN, then rotate "Function knob", to set up options and parameter according to demands.
NORMAL
EFFECT
DIM: 000% EFFECT: PULSE
MODE:HSI HUE: 120 SAT: 100%
PULSES/MIN: 5
CH:512
Rotate "SELECT knob" to adjust selection.
NORMAL
EFFECT
DIM: 000% EFFECT: FLASH
MODE:CCT CCT:: 2700K G/M: +00
INTERVALS: 01.09s
FLASH RATIO: 098%
PAUSE: ON
CH:512
Rotate "Function knob" to set up options and parameter.
NORMAL
EFFECT
DIM: 000% EFFECT: PULSE
MODE:CCT CCT: 7500K G/M: +50
PULSES/MIN: 5
CH:512
Rotate "Function knob" to set up options and parameter.
17