Table of Contents
Advertisement
6-1-6 How to use// RU-901G3
Parameter setting
Push and hold the "SET" button to enter the
setting mode. Push the ▲/▼ button to choose
to set RX (receiver) or TX (transmitter).
When RX receiver is selected:
◎ FREQ: frequency setting
In 1MHz
Select frequency with ▲/▼
In 0.025MHz
Select frequency with ▲/▼
◎ Group / channel
G: group
Select default group 1~6
CH: channel
Select default channel, 1~23 max
◎ SQ Receiving sensitivity
-5~+10dB;
-5 is the maximum sensitivity.
select
+10 is the minimum sensitivity.
SQ with
The default setting is 0.
▲/▼
OR
Select the number of frequency first in MHz and
then in 0.025MHz.
Select the group when "G" is flashing; select the
channel when "CH" is flashing.
The default setting is 0.
40
Advertisement
Table of Contents
