JTS UT-16G3 Instruction Manual page 29

Binding
When relevant parameters are set, press the
digital binding data to the transmitter by using the ultrasonic transmitter,
while setting relevant parameters synchronously. When data is being
transmitted, the indicator flashes quickly. When the synchronization is
completed, the receiver receives the corresponding channel or frequency,
and the light will stop immediately. If no signal is received after a period of
time, the light will flash slowly, informing the user of the failure of binding
(the slow flash can be cancelled by pressing any key).
Note: The optimum binding distance is 10~60cm, ±30°.
Note 2: Only one transmitter can be synchronized at the same time. When RX1 is
synchronized, RX2 cannot use the synchronization function until the completion of
synchronization of RX1.
25
MINIATURE MUSIC INSTRUMENT WIRELESS SYSTEM
key to transmit the
-30 +30
10~60cm