Table of Contents
Advertisement
Page 182 of 198
Installing the CS 1000 Linux Base
Installing Linux applications
Joining the UCM security domain
NN43021-459
Standard 05.04
lnstalling a Signaling Server
You must install CS 1000 Linux Base if your Signaling Server is not running
the latest CS 1000 Linux Base software release. The CP PM Linux upgrade
kit contains a hard drive with CS 1000 Linux Base preloaded. You can install
CS 1000 Linux Base from the command line interface (CLI) using a bootable
CF card on CP PM, and using a bootable optical disk on COTS.
Configure the ELAN, TLAN, IP address, Gateway, subnet masks, date, and
time settings during the CS 1000 Linux Base installation.
For information about installing or upgrading CS 1000 Linux Base, see Avaya
Linux Platform Base and Applications Installation and Commissioning
(NN43001-315).
Avaya CS 1000 Release 7.5 Signaling Server and SIP line software are Linux
applications. Linux applications install on CS 1000 Linux Base and interact
with the CS 1000 Linux Base application framework. You can deploy and
install Linux applications with the CS 1000 Linux Base Centralized
Deployment Manager. You can configure and deploy SIP Line with Element
Manager (EM).
For information about Linux applications and Centralized Deployment
Manager, see Avaya Signaling Server IP Line Applications Fundamentals
(NN3001-125) and Avaya Linux Platform Base and Applications Installation
and Commissioning (NN43001-315).
For information about Element Manager, see Avaya Element Manager:
System Administration (NN43001-632).
The UCM Primary Security Server acts as the RADIUS server that CS 1000
devices use to obtain authentication and access control parameters for CLI
access. The UCM Primary Security Server sends RADIUS related parameters
to CS 1000 devices using the SSH protocol.
March 2012
Advertisement
Table of Contents
