Epson Stylus COLOR 900 Service Manual page 113

EPSON Stylus COLOR 900/900N
4.2.8.10 Encoder Belt Removal
1. Remove the upper case. (See
2. Using your hand, push the tensioning mechanism to the right to
loosen the encoder belt, and then remove the encoder belt.
Tensioning Mechanism
Figure 4-38. Encoder Belt Removal
page 91.)
Encoder Belt
Chapter 4 Disassembly and Assembly
C H E C K
After installing the encoder belt, view the carriage unit
P O I N T
from the side to make sure the belt passes through the
slot in the photo sensor.
Encoder Belt
Sensor
Figure 4-39. Positioning the Encoder Belt
110